This is a pair of CLAYMORE V2 tire without insert from PROCIRCUIT. Like its predecessor, it’s a tire very demanded by our official team drivers. This tire is an evolution or combination of the Square Impact and the Hot Dice. These two treads are the most used on competition events by our team drivers, so we decided to combine them and bridge the gap between them with the same Square Impact’s pins pattern but larger pins similar to the Hot Dices.
The Claymore was the tire our team drivers used at the 2016 IFMAR Worlds in Las Vegas, when Robert Batlle took the 2nd podium spot.
The V2 increased the total number of rows and slightly increased the size of the pins to maintain the excellent grip and speed in the most demanding tracks. These two modifications improve the life of the tire.
The Claymore V2 stands up on clean layouts, blue groove or slightly wet surfaces and provides excellent forward traction and speed.
The V2 series features a new insert (not included) to better fit the new tire structure improving the overall performance with more consistent handling in the bumps, effortless jumping and an easy to drive feeling.
Procircuit S compounds have been developed for slippery surfaces. For those conditions where is missing a little bit of grip with C compounds. With the S compounds we have achieved greater lateral grip, greater durability and, being less elastic than the C compounds, they centrifuge less at full throttle.
S compounds are available only for the Claymore and Addictive tread patterns
Available in C1 Super Soft (white), C2 Soft (yellow), C3 Medium (orange), C4 Hard (blue), K1 Clay Super Soft (pink), K2 Clay Soft (red), S1 Super Soft (white double dot), S2 Soft (yellow double dot) and S3 Medium (orange double dot) compounds. Compounds K1, K2, S1, S2 and S3 are only available unlgued without insert and rim.
C and K compounds: Wipe the gluing area with a clean cloth and brake cleaner. Then, using another clean cloth, wipe again with Procircuit Green Tire Cleaner part # PC0015. Use a fresh Procircuit’s Tire Glue to ensure a perfect bond. Part # PC0012
S compounds: Only sand the rubber, no cleaning is necessary. Use a fresh Procircuit’s Tire Glue to ensure a perfect bond.